Anping County Anhesheng Hardware Mesh Products Co., Ltd.
Anping Anhesheng Hardware Mesh Products Co., Ltd.
Add to Cart
125X 250X Plastic Structured Packing Polypropylene For Sewage Treatment
Plastic Structured Packing Classification
Plastic perforated plate packing has similar structure with metal structured packing, which can be divided into plate packings and wire gauze packings.
The materials used for the filler are polypropylene, polyethylene, polyvinyl chloride and reinforced polypropylene.
The surface of the packing is pressed with a special stripe, and the selection of the packing is based on the operating conditions. The corrugated plate is an improved corrugated plate. The corrugated plate shall be installed vertically parallel to the longitudinal axis of the container. The corrugated direction on the plate is 30°-60° with the length direction of the plate. The ripples on the same corrugated plate are parallel to each other; The corrugations of the adjacent plates form an intersection.
When the fluid flows in this part, it moves up and down, which helps to coalesce, float up or settle the dispersed phase droplets, and greatly improves the processing capacity and separation efficiency.
Plastic Structured Packing Application
It is widely used in the operation of absorption and decomposition absorption devices, especially in the production process with heavy liquid load and high operating pressure, such as (HCl) and (H2SO4) production, degassing CO2 and H2S from natural gas, drying chlorine, liquid production, waste gas purification and decomposition absorption deoxygenation devices.
Plastic Structured Packing Specification
Structured packaging has two slants, "X" and "Y". The "Y" type packing, with an inclination of approximately 45º to the horizontal axis, is the most widely used packing. They offer higher filtration efficiency than the "X" type, but at the cost of higher pressure drop/lower capacity. The "X" type packing has an inclination of 60° to the horizontal axis and is suitable for high volume and low pressure drop applications.
| Packing type | Theoretical Plate Number(piece/m) | Surface area (m²/m³) | Void Volume (m³) | Bulk Density (kg/m³) | Liquid Loading(m³/m²·h |
| 125Y | 1-2 | 125 | 0.985 | 37.5 | 0.2-100 |
| 250Y | 2-2.5 | 250 | 0.97 | 75 | 0.2-100 |
| 350Y | 3.5-4 | 350 | 0.95 | 105 | 0.2-100 |
| 500Y | 4-4.5 | 500 | 0.93 | 150 | 0.2-100 |
| 125X | 0.8-1.9 | 125 | 0.985 | 37.5 | 0.2-100 |
| 250X | 1.5-2 | 250 | 0.97 | 75 | 0.2-100 |
| 350X | 2.3-2.8 | 350 | 0.958 | 105 | 0.2-100 |
| 500X | 2.8-3.2 | 500 | 0.93 | 150 | 0.2-100 |
Anping County Hardware Mesh Products Co., Ltd. is located in Anping County, Hebei Province, known as the "Hometown of Chinese Wire Mesh". The company is a dedicated manufacturer of wire mesh demisters. The company has more than 90 sets of knitted mesh equipment. The wire mesh demister is the main product of our company. Most of our employees are operation, maintenance, and installation personnel with practical experience, who can provide customers with the required engineering consultation and installation of tank filtration. solution.Nearly 20 years of experience in the production of mist eliminator mats, knitted wire mesh, and other packaging materials.
We have ISO9001 certification and a strict quality control system in the QC department of the enterprise.
We claim that all mist eliminator pads our customers receive are qualified and perform perfectly. We have different specifications.
The filtration fineness can reach 3μm~5μm. In addition to standard and popular sizes, we can also customize specific applications according to customer needs.
During the company's development, through continuous on-the-spot inspections, personal exchanges and cooperation with customers, and comprehensive discounts and technical support, we have won strong customer support and praise.
The company's performance has maintained an annual output value growth rate of 30-40. Our employees pursue the policy of "enterprising, truth-seeking, rigorous and united", continue to develop and innovate, take technology as the core, and wholeheartedly provide you with cost-effective products, high-quality engineering design, and services.
Welcome customer consultation and I sincerely look forward to cooperating with you!
Q: If I want to know the price, what information should I give you?
A: Material, size, application/purpose, quantity, payment term FOB or CIF, packaging term, etc.
Q: Is the size fixed?
A: No, except for table size. Can be customized according to demand!
Q: Can I negotiate the price?
A: Yes, we will give discounts according to the quantity and type of products you need.
Q: How long is the delivery time?
A: It usually takes 7-10 working days; it depends on the specific quantity and type.